PERCIEVED HEALTH IMPACT OF WELDING FUMES AMONG WORKERS IN THE FABRICATION FACILITIES IN PORT HARCOURT

E. OSUGBA; J. UGBEBOR; U. EJIKEME

doi:10.5281/zenodo.20257713

E. OSUGBA Center for Occupational Health, Safety and Environment, Institute of Petroleum Studies, University of Port Harcourt, Rivers State, Nigeria
J. UGBEBOR Center for Occupational Health, Safety and Environment, Institute of Petroleum Studies, University of Port Harcourt, Rivers State, Nigeria
U. EJIKEME Center for Occupational Health, Safety and Environment, Institute of Petroleum Studies, University of Port Harcourt, Rivers State, Nigeria

DOI: https://doi.org/10.5281/zenodo.20257713

Keywords: Health Impact, Welding Fumes, Fabrication Facilities, Port Harcourt

Abstract

This study examined the perceived health impact of welding fumes among workers in the fabrication facilities in Port Harcourt. The objectives were to; examine the prevalence of workplace-related injuries associated with welding fume exposure among welders in a fabrication facility in Port Harcourt, examines prevailing safety practices and investigate preventive actions and control measures that should be taken to reduce the effects of these fumes on welder. Using cross-sectional descriptive survey design, structured questionnaire was administered to 300 welders selected from the sampled fabrication facilities. Descriptive statistics methods such as frequencies and percentages were used for data analysis. The results revealed that 66.7% (156) of the welders in the fabrication facility reported experiencing workplace injuries associated with welding fumes such that burns (139, 59.6%) and eye injuries (117, 50%) are the most common. Respiratory issues were reported by 34.6% (80) of the welders, while cuts and lacerations affected 29.5% (69) workers. Use of Personal Protection Equipment (PPEs) (96, 41.5%), ventilation systems (159, 68, 29.1%) and regular safety training (86, 36.8%) are safety practices adopted to prevent exposure to fumes while provision of PPEs (178, 76.1%) regular health check-ups (112, 47.9%) and use of local exhaust ventilation (156, 66.7%) are most common control measures adopted by fabrication facilities to reduce the effects of welding fumes. These findings highlight the high prevalence of work-related problems linked to welding fumes and the need to enforce occupational health and safety regulations aimed at reducing welding fume exposure, as well as encouragement and enforcement of the use of PPE, ventilation systems and proper safety training to mitigate the injuries among welders in fabrication industries in Port Harcourt.

Downloads

Download data is not yet available.

References

Achalu, E. (1999). Nigeria’s environmental problems and current legislative control. The Action Plan, Nigerian School Health Journal, 1(1&2), 112-134201

American Welding Society. (2020). Welding safety guide. Retrieved from https://www.aws.org/standards/page/welding-safety-guide

Antonini, J. M., Taylor, M. D., Zimmer, A. T., & Roberts, J. R. (2004). Pulmonary responses to welding fumes: role of metal constituents. Journal of Toxicology and Environmental Health, Part A, 67(3), 233-249. https://doi.org/10.1080/15287390490275191

Bakri, S., Hariri, A., Ismail, M., Abdullah, S., & Kassim, I. (2018). Evaluation of respiratory symptoms, spirometric lung patterns, and metal fume concentrations among welders in indoor air-conditioned buildings in Malaysia. International Journal of Integrated Engineering, 10(5), 109-121.

Balkhyour, M., & Goknil, K. (2010). Total fume and metal concentrations during welding in selected factories in Jeddah, Saudi Arabia. International Journal of Environmental Research and Public Health, 7(7), 2978-2987. https://doi.org/10.3390/ijerph7072978

Budhathoki, S. S., Singh, S. B., Sagtani, R. A., Niraula, S. R., & Pokharel, P. K. (2014). Awareness of occupational hazards and use of safety measures among welders: a cross-sectional study from eastern Nepal. BMJ open, 4(6), e004646. https://doi.org/10.1136/bmjopen-2013-004646

Cosgrove, M., & Zschiesche, W. (2016). Are welding of steels and pulmonary fibrosis. Weld World, 60, 191–199.

Doherty, M. J., Healy, M., & Richardson, S. G. (2004). Total body iron overload in welder's siderosis. Occupational and Environmental Medicine, 61, 82–85. https://doi.org/10.1136/oem.61.1.82

El-Zein, M., Infante-Rivard, C., & Malo, J. (2005). Is metal fume fever a determinant of welding-related respiratory symptoms and/or increased bronchial responsiveness? A longitudinal study. Occupational and Environmental Medicine, 62, 688–694. https://doi.org/10.1136/oem.2004.017854

Fajonyomi, A. A. (2003). Overview of the research process. In A. A. Fajonyomi & M. G. Fajonyomi (Eds.), Research process in education and social sciences (pp. 1–15). Goldy O. Publishing Co.

Flynn, M. R., & Susi, P. (2009). Manganese, iron, and total particulate exposures to welders. Journal of Occupational and Environmental Hygiene, 7(2), 115–126. https://doi.org/10.1080/15459620902777513

Guha, N., Loomis, D., & Guyton, K. (2017). Carcinogenicity of welding molybdenum trioxide, and indium tin oxide. Lancet Oncology, 18, 581–582. https://doi.org/10.1016/S1470-2045(17)30256-X

Kothari, C. K. (2004). Research methodology: Methods & techniques (2nd ed.). New Age International.

Meo, S. A., & Al-Drees, A. M. (2005). Lung function among welders working in Jeddah, Saudi Arabia. Pakistan Journal of Physiology, 1(1-2), 44–47.

Occupational Safety and Health Administration (OSHA). (2020). Controlling hazardous fume and gases during welding. U.S. Department of Labor. DSG FS-3647 03/2013

Orodho, J. A. (2012). Techniques of writing research proposals and reports in education and social sciences. Maseno/Nairobi: Kanezja HP Enterprises.

Orodho, J. A., & Kombo, D. K. (2002). Research methods. Kenyatta University, Institute of Open Learning.

Popović, O., Prokić-Cvetković, R., & Burzić, M. (2014). Fume and gas emission during arc welding hazards and recommendations. Renewable and Sustainable Energy Reviews, 37, 509–516. https://doi.org/10.1016/j.rser.2014.05.045

Simiyu, S. W., & Cholo, W. (2017). Dynamics of occupational injuries among metal workers in Kamukunji Jua Kali Market, Nairobi, Kenya. International Journal of Academic Research and Development, 1(12), 1–7. https://doi.org/10.21276/ijard.2017.1.12.1

Susi, P., Goldberg, M., Barnes, P., & Stafford, E. (2000). The use of a task-based exposure assessment model (T-BEAM) for assessment of metal fume exposures during welding and thermal cutting. Applied Occupational and Environmental Hygiene, 15(1), 26–38. https://doi.org/10.1080/104732200301827

Thaon, I., Demange, V., Herin, F., Touranchet, A., & Paris, C. (2012). Increased lung function decline in blue-collar workers exposed to welding fumes. Chest, 142(1), 192–199. https://doi.org/10.1378/chest.11-0647

World Health Organization (WHO). (2016). Constitution of the World Health Organization. WHO Chronicle, 1, 1–11.

Yi, J. H. (2015). Welding-fume-induced transmission loss in tapered optical fibers. Journal of the Korean Physical Society, 67(5), 832–846. https://doi.org/10.3938/jkps.67.832.